Видео

I hope this Really takes off , Good luck 🤞

How long to dry before applying the topcoat?

Thanks for sharing this video Louis! Do you still sell Axalta or strictly Renner now? How well do you think that precat lacquer will perform overtime compared to Renner 851 catalyzed or 688 catalyzed fully?

I want to finish an exterior door that is protected from weather but gets some sun. What is the best finish to use that will be easy to touch-up in the future? I never want to have to sand it down and redo the finish.

Wtf is easy about this? When I read easy, I assume you tell me to buy some at home Depot and that's it, not use a sprayer and shit smh

I have both your white oak stain and clear coat. I asked our carpenter to do one sample board the way you demoed in your video with one coat of the white oak stain, and another with 2 coats of the white stain. I was surprised at how much lighter the 2 coats was. I am a novice but repeated this same process myself to create the two samples, and didn’t notice as much of a difference between the two. Would the way this is applied factor into how different the two samples were from each other? I really liked the lighter sample I created with the two white oak coats, but his was so much lighter and I don’t know why. I’d like to have our cabinets stained to look like the sample I created with the 2 coats of white oak stain followed by the 2 clear topcoats.

What was that other white oak that you brought out to compare toward the end. It’s lighter

It's in a good neighborhood so let's charge'em up!

hi i have problem in applaying YO90m790 in renner italia products how can you help me?

Turn the music off!!!!!

Ugly too much coat bro let the would show not a inch of yuck

Nice. A modest introduction to me about spraying dyes. Can oil based stains be sprayed? Wanting to gingerly step into it, utilize an old Apollo 2 stage/5000 series gun.

Hola Julio! Podcast room is looking sick!

Dope!!!!!

Can this be used for stair threads?

I have a standard price 275.00 an opening I don’t care if you have big or little. Still have to take off sand prime paint move them around cover ect etc I started at 150 and was losing went to 175 then 225. I changed product to renner way more expensive and bumped price again.

I see that this video is a couple of years old, so I'm hoping I get a reply back 😅.. where can I find Renner ? I'm in the St. Louis MO area. I have a small painting business, and usually do 3 or 4 kitchens a year. I've always used sirca products in the past but I can't get that product any longer. Now, I've been pushing in the direction of doing more kitchen cabinets and fine finishing projects and I hear great things about Renner.. just don't know where to find it. I don't think anywhere in the St Louis area has a distributor. Can you point me in the right direction ? Thanks 🙏🏼

Renner Neutral acrylic converter I know 10% catalyst but how much reducer or thinner I should add?

Is ok to add water?

Are they solid wood or veneer?

Just ordered your white oak stain and clear. However the woman I spoke with said you used the 1089 10 sheen. While I may still have a chance here to change this please clarify for me. Thank you!

Where we can bu renner in uk

Did u put some lacquer or any hardener or etc its look like 2k poly

What stain and products I need to buy to achieve this look

Switched from Renner to Gallery. Sry!

How long dose the stain take to dry before putting on the top coat

According to the manufacturer, product CANNOT be used directly out of can and MUST be sprayed. Therefore, your review is biased and inaccurate. Thanks anyway.

Just did my large bathroom vanity doors and drawer fronts. I hung the doors on a rack and got some runs on them. But the drawer fronts were good as I did them laying down. I have the fugi 4 unit and thinned the primer to their specs with a 1.5 nozzle. But it looks like I could have sprayed the primer with no thinning. I could tell by the way it sprayed. Too running going on. I will try spraying the advance straight out of the can.

Bad review. Spray both with the same exact color .

I make a spray only stain that I fog on semi wet.. I mix 300 grams of Titanium White 866 pigment in a gallon 40% acetone 60% butyl acetate.. I add a 1 gram of the lamp black pigment and and .5 grams of pathalo blue... By foging it on, I can fog it heavier on the darker grain making the color more consistent... And it dries super fast.

Fine Finish Supply is a Renner distributor. That’s all you need to know. In no way shape or form is this a bias comparison. Riiiiiight.

I have a few questions lemme know if u have a sales rep available to talk thnx

Slt explication en francais un peux

Great video! When 765 is catalyzed, is their enough pot life to spray both sides of the doors without sticking when you spray horizontally? Thats what I'm use to as well. i'm just starting to use renner products. Really helpful!

Is this a situation where the client complained that the panels don’t match?

Where are you buying this paint.

I appreciate the video. I think you should add to your video what type of respirator is needed for different products.

Can you share the product info on that pen light you were using? Great video!

How long does the clear take to dry?

Looking to spray my kitchen cabinets .Firstly does pre painted cabinets need to be primed or would two top coats suffice amd also can a finish of this standard be achieved with a diy sprayer ?

Can you tell me what i tell me finisher to get this look? Steps exactly? Im lost

I’ve used my Titan 440 for pretty much everything. Exterior, interior ceilings and trim etc… I have an Apollo eco series 4 7000 and only use it for steel doors and items that require a very fine finish. I do like how the HVLP has very little overspray. It might take longer but that’s fine. Thanks I like videos like this. ❤

Gallery series is meant to be sprayed…it is a spray only product. If you are going to do a comparison you should use the correct application method

How do u spray both sides with out damaging the fresh coat ? Or do u wait for one side to be fully dry and then spray the finish coat on the other side ?

We all saw what you did. That right there is how you give an everlasting bad name for yourself. Good job

How much catalyst should I put ?

ive had picky customers that think the white oak gets to orange . what i did is spray laqcour thinner with a drop of blue tint . the hint of blue kills the orange just a little bit . to give it a little bit of a grey look.

Which top coat did you shoot?

Looks great. I think it looks very natural.

Thank you for the great advice, Did you need to reduce the paint to be able to shoot thru the Apollo spray system? And if so by how much?